略談織造器材的管理與維修保養
2022-04-18 16:03:18   來源：   評論：0 點擊：

  關鍵詞：織造；異形筘；綜框；綜絲；停經片；筘齒；側檔；自動穿經；穿紗眼
中圖分類號：TS103.82⁺4          文獻標志碼：B         文章編號：1001-9634(2022)02-0024-03
 
Abstract:In order to make good use of weaving accessories，the function，material and characteristics of profiled reed，heald frame，heald and drop wires for shuttleless looms are introduced，and the management，repair and maintenance measures are described in detail.It is pointed out that the properties of profiled reed，heald frame，heald and drop wire have direct influence on the production efficiency and cloth quality.Reeds are numbered according to width and reed tooth density，and is cleaned with ultrasonic wave，and the chamber shall be kept dry and ventilated.The heald frame should be cleand with high-pressure gas spray gun after removed from machine，the grease in the joint part of the side gear hanger foot should be cleand，and the side gear should be fully lubricated；heald is strictly managed according to the service life and is used according to the warp number and weaving difficulty；drop wires are classified and marked with different color according to the use time of every two years，and should be chosen and used according to the yarn number and weaving difficulty；systematic and informationized management and use as well as standardized maintenance can prolong the service cycle of weaving accessories，reduce production costs，and improve weaving efficiency and product quality.
Key Words:weaving；profiled reed；heald frame；heald；drop wire；reed tooth；side gear；automatic drawing-in；yarn threading eye
 
參考文獻：
[1] 朱蘇康，高衛東.機織學[M].2版.北京：中國紡織出版社，2015：290-320.
[2] 祝憲民，徐林.紡機專用基礎件行業現狀分析與發展思路探討[J].紡織器材，2015，42（1）：2-4.
[3] 由學志，由希雨，周家驤.鋼筘標準與其質量檢測[J].紡織器材，2006，33（4）：29-32.
[4] 林吉曙.鋼筘失效機制的探討[J].紡織器材，2001，28（5）：19-21.
[5] 孟慶勇.鋼筘應用技術點滴[J].紡織器材，2008，35（增）：23-28.
[6] 王艷芳.噴氣織機綜框磨損原因分析及其對策[J].上海紡織科技，2009（3）：14-15.
[7] 韓斌斌，任雙寧，張水仙，等.新型鋁合金綜框結構改進設計[J].紡織器材，2017，44（1）：15-17.
[8] 邱海飛.綜框的技術進展及研究方向[J].棉紡織技術，2016，44(5):80-84.